PowerFoam    Expanding Polyurethane Foam

Product Description :
PowerFoam is a single component, moisture curing expanding polyurethane foam. Theadhesive strength of PowerFoam allows it to be set on various types of building elementsincluding concrete, brick, wood, metal, aluminum and steel. When installing the foam,consideration should be given to the 2-3 times expansion of the foam after it leaves theplastic tube. The surface of the foam initially dries within 1- 5 hours and becomes fullycured in 12-15 hours. The foam works best at room temperature. It is dispensed througha straw-like plastic tube that is packaged with the can. The structure of the hardened foamprovides excellent insulation against heat and noise. The foam has a R-5 equivalent valuewhen used in place of traditional installation methods.

General Applications and Uses :

PowerFoam is used in applications where it is not necessary to control the size of the beador the rate of flow. PowerFoam can be used in a wide variety of applications. Use it to fill,seal or insulate. It blocks drafts, stops leaks, saves energy, adheres to all types of constructionmaterial, deadens sound, acts as a buoyancy material once cured, controls radon, confinesasbestos fibers, and can be used in HVAC applications. PowerFoam also seals and keeps outinsects and rodents. After installation, it is recommended that a full 24 hours elapse prior toscraping, sanding staining or painting.

Insulating :

Around window frames, sills, door frames floor/wall joints

Refrigeration units and pipes

Electrical junction boxes

Attics

Air conditioning systems

Filling :

Breaches in walls

Sound Dampening

Voids in concrete forms

Pipe penetrations in non-fire rated walls

Underground ductwork

Features and Benefits :

CFC Free Propellant

Class B2 Flame Retardant

Physiologically Harmless When Fully Cured

Contains no Urea Formaldehyde or PCB'S

Does Not Rot Or Deteriorate With Age

Water Resistant

Low Odor

High Foam Yield – Up To 1.8 Ft³ Per 29 Oz. Can

Precision Plastic Valve Helps Prevent Pressure Loss And Prolongs Shelf Life

Stop And Go Application Product Remains Liquid In Applicator Until Dispensed

Minimal Subsequent Expansion (± 10%)

Compatible With PVC

Approvals and Listings :
Underwriters Laboratory (UL Listing) – File No. R16754, Caulkings and Sealants

• Tested in accordance with UL 723 “Test for Surface Burning Characteristics ofBuilding Materials”
• Applied to Inorganic Reinforced Cement Board tested as applied in two 1"
  diameter beads, 5" OC covering 12.5 percent of the exposed test area:
  Flame spread 10
  Smoke developed 30
  Tested in accordance with ASTM E 90 (Sound Transmission Classification 60), ASTM C 518 and ASTM C 423
  

View Product Specification

View Material Safety Data Sheets
English

Manufacturer: Anchors Powers DeWalt

For More Information on the PowerFoam, [Click Here] to Link to Manufacturer Web Site